Skip to content

8711 Module Programming Tool Guide

Preparation:

To enter programming mode: Programming Mode

And here is the 8711 module image: 8711 Module

1. Start Using the Tool

After downloading the tool, locate the file shown in the image and double-click to open. File Selection

2. Open the Software

Once the software is open, click File, then click Open to select the firmware file. Open File

3. Select Firmware File

Choose the "AmebaDplus FreeRTOS NOR.rdev" (third file) to burn the 8711 firmware. For burning the 8730 firmware, select the sixth file, as per your needs. Select Firmware

4. Choose Configuration and Firmware

Ensure the firmware name matches and select the correct configuration file. Configuration Selection

5. Configure Port and Baud Rate

Select the serial port, baud rate, and other settings as shown in the image (normally, it will auto-select). After verification, click the "Download" button to start the burning process. Start Download

6. After Burning

Once the burning process is completed without errors, check the serial port logs. If the logs are printed correctly, the burning is successful. Log Output